Subwoofer Amplifiers - Page 2 - Extreame Savings! Save up to 50%


Extreame Savings! Up to 50% off on Subwoofer Amplifiers at Aropub, Page 2. Top brands include KLI, Dayton Audio, AOSHIKE, Velodyne, FidgetFidget, ESX, Acoustic Audio by Goldwood, B&C, Unknown, Skar Audio, & uxcell. Hurry! Limited time offers. Offers valid only while supplies last.



JAMO SUB800 AMPLIFIER, 79185
JAMO SUB800 AMPLIFIER, 79185
By KLI
In Stock
$191.63

mpn: 79185, ean: 0888511190010,

4.8 out of 5 stars with 107 reviews
JAMO SUB800 AMPLIFIER FOR JAMO SUB WOOFER MODEL SUB800NEW. PART NUMBER: 79185. COMPATIBLE WITH MODEL: SUB800. OEM JAMO PART.


Dayton Audio SPA250 250 Watt Subwoofer Amplifier
Dayton Audio SPA250 250 Watt Subwoofer Amplifier
By Dayton Audio
In Stock
$149.95
$139.80
You Save: 7%

mpn: 300-803, ean: 0844632094897,

4.5 out of 5 stars with 146 reviews
Engineered to provide flexibility, ample power, and reliability, the Dayton Audio SPA250 delivers high fidelity subwoofer amplification and is tailored for home audio and home theater audio systems.Switchable 6 dB @ 35 Hz bass boost Measured power output: 156 watts RMS into 8 ohms @ 0.1% THD, 252 watts RMS into 4 ohms @ < 1.0% THD. Mono Class AB output stage for solid, well defined output. Low-level, high-level, and LFE inputs connect to any system. Manual, auto, or triggered on/off modes for


AOSHIKE LM1036N + NE5532 Dual Channels Preamplifier Board Tone Adjust Amplifier for HIFI Steroe Audio System
AOSHIKE LM1036N + NE5532 Dual Channels Preamplifier Board Tone Adjust Amplifier for HIFI Steroe Audio System
By AOSHIKE
In Stock
$15.59

ean: 0732025420715,

4.4 out of 5 stars with 77 reviews
LM1036N + NE5532 Preamplifier Board Tone Adjust Amplifier for HIFI Steroe Audio system PCB size: 132*55*1.6mm Power supply voltage: 9-15V The distance between the potentiometer 35.56mmLM1036N + NE5532 Preamplifier Board Tone Adjust Amplifier.


Velodyne SC-600D 400w Subwoofer Amplifier
Velodyne SC-600D 400w Subwoofer Amplifier
By Velodyne
In Stock
$556.90
$546.85
You Save: 2%

mpn: 80SC600D, ean: 0660324003233,

4.4 out of 5 stars with 7 reviews
The SC-600D is a matching amplifier to the SC-600 IW and SC-600 IF/IC subwoofers. The 400 Watt amplifier is digitally tuned for dynamic bass and includes distortion limiting electronics. Twin subwoofers can be installed using a rear-panel pass through on one amp to a second SC-600D. (If you want to use one amp to drive two subwoofers, use the SC-602.) The amplifier comes with a remote control with a one-button, 5-band, Auto-EQ room bass optimization feature, four listening presets, night mode,


FidgetFidget Radio transceiver Assembled S-PIXIE CW QRP super shortwave radio 7.023khz + case
FidgetFidget Radio transceiver Assembled S-PIXIE CW QRP super shortwave radio 7.023khz + case
By FidgetFidget
In Stock
$16.27

mpn: guangpingUSW-ONAM-720-03730D98E0, ean: 6954231686271,

4.0 out of 5 stars with 94 reviews
Feature :it is assembled 1. Introduction ''PIXIE'' is a very small volume of simple 40 meter band micro-power amplitude telegraph transceiver, Despite it's small size and DC receiver limitations, it is capable of working several hundred miles when connected to a good 40 meter antenna. ''S-Forty-9er'', Designed by ''LXQQFY.com'',. Improvements are as follows: z The vertical resistance is changed to horizontal resistance, Solves the problem of resistance to short circuit. z We do not distinguish


Dayton Audio SA230 230W Subwoofer Amplifier (Black)
Dayton Audio SA230 230W Subwoofer Amplifier (Black)
By Dayton Audio
In Stock
$249.95
$234.80
You Save: 6%

mpn: SA230, ean: 0844632089572,

4.6 out of 5 stars with 125 reviews
The Dayton Audio SA230 subwoofer amplifier offers its owner the freedom to use a stand-alone, high quality amplifier to operate a subwoofer speaker system.Heavy-duty steel chassis with brushed aluminum faceplate. Mono Class AB output stage for solid, well defined output. Low-level, high-level, and LFE inputs. Manual, auto, or triggered on/off modes for integration into any automated system. Selectable bass boost.


Esx Xenium 4 Channel X Four
Esx Xenium 4 Channel X Four
By ESX
In Stock
$209.00

mpn: X-FOUR, ean: 0635927103291,

4.6 out of 5 stars with 123 reviews
Mit der xenium-serie präsentiert esx drei durchdachte verstärker mit geringer grundfläche, die heutigen ansprüchen an kompaktheit und hoher performance mehr als gerecht werden. Dank der platzsparenden, aus der computerfertigung bekannten smd-technlogie ist es gelungen, beeindruckend hohe leistung und grandiose ausstattung in zeitlos schicke gehäuse zu packen. Mit leistungsdaten von bis zu 750 watt rms an 1 ohm und master/slave-option, zählt der in class d-technologie ausgeführte x-one


Acoustic Audio WS1005 Low Frequency Passive Subwoofer Amplifier
Acoustic Audio WS1005 Low Frequency Passive Subwoofer Amplifier
By Acoustic Audio by Goldwood
In Stock
$98.88

mpn: WS1005, ean: 0849155034221,

4.7 out of 5 stars with 111 reviews
Acoustic Audio by Goldwood's amp for an in wall subwoofer includes LFE and RCA inputs, Gain and Crossover controls, and raw wire speaker outputs. This WS1005 works with almost all home audio receivers with subwoofer outputs and will deliver plenty of bang for the buck!To be used with Passive Subwoofers only ,In Wall or In Ceiling Home Entertainment,Home Theater Systems,Industrial Sound Systems ,Multiple Room Systems. Power Amplifier Output: 200 Watts, Low Bass Frequency Response of 50 - 200 Hz


B&C Subwoofer Amplifier (12NDL88)
B&C Subwoofer Amplifier (12NDL88)
By B&C
In Stock
$269.00

mpn: 12NDL88, ean: 0611138347433,

4.3 out of 5 stars with 89 reviews
The 12NDL88 12'' 8 ohm woofer from B&C is excellent for use in the most demanding high output speaker systems. This driver can handle 1,400 watts of continuous power and has 8 mm Xmax capabilities thanks to an advanced neodymium motor and carefully optimized, double spider suspension.Smooth response and excellent efficiency allow natural sound at extreme output levels. Waterproof treated paper cone stands up to the harshest conditions. Ventilated voice coil gap reduces power compression and


MagiDeal 44MM Full-range Vibration Speaker Loudspeaker 4 Ohms 20 Watts Bass Horn
MagiDeal 44MM Full-range Vibration Speaker Loudspeaker 4 Ohms 20 Watts Bass Horn
By Unknown
In Stock
$31.98
$15.99
You Save: 50%

mpn: e1620aaf5ec0c1c1f1b32f3143532314, ean: 0706612607438,

4.8 out of 5 stars with 28 reviews
You will find what you want in Sports & Outdoors, Home & Kitchen, Beauty, Clothing, Health & Household, Tools & Improvement, Automotive Parts etc.Description: - 44MM vibration speaker - Size: Diameter x Height = 44MMx29MM - Impedance: 4 ohms - Power: 20WSpecification: - Material: Iron - Size: 44x29mmPackage Includes:1 Piece 44mm Vibration Speaker Loudspeaker44MM vibration speaker. Size: Diameter x Height = 44MMx29MM. Impedance: 4 ohms. Power: 20W.


MagiDeal 6.5inch Subwoofer Glass Fiber Mid-bass 4Ohm Stereo Audio Loudspeaker DIY
MagiDeal 6.5inch Subwoofer Glass Fiber Mid-bass 4Ohm Stereo Audio Loudspeaker DIY
By Unknown
In Stock
$49.98
$24.99
You Save: 50%

mpn: 0769006190015UKA, ean: 0706612609074,

4.4 out of 5 stars with 77 reviews
You will find what you want in Sports & Outdoors, Home & Kitchen, Beauty, Clothing, Health & Household, Tools & Improvement, Automotive Parts etc.Description: - The speaker cone is made from imported fiberglass to provide high sensitivity and good rigidity of sound. - Adopt high performance ferrite magnet to promise sweet alto voice and strong bass compensation. - full range 6.5'' midrange, 40 watts RMS and 80 watts max, 14k Hz frequency response, 97dB, 8ohm. - stamped steel frame, overall


Skar Audio SK-1500.1Dv2 Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1500W
Skar Audio SK-1500.1Dv2 Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1500W
By Skar Audio
In Stock
$270.10
$269.99

mpn: SKv2-1500.1D, ean: 0739189979103,

4.3 out of 5 stars with 150 reviews
The skar audio skv2-1500.1D is the ultimate powerhouse monoblack subwoofer amplifier for use in applications where competition grade power and reliability is required. Stable at 1 ohm, and featuring high-speed Mosfet power supplies, this amplifier is capable of extreme levels of power output for extended periods of time. For maximum current flow and sustained power output, the skv2-1500.1D utilizes oversized 1/0 gauge power and ground input terminals. The advanced heat sink design allows for


Dayton Audio SPA1000 1000W Subwoofer Plate Amplifier
Dayton Audio SPA1000 1000W Subwoofer Plate Amplifier
By Dayton Audio
In Stock
$377.75
$365.80
You Save: 3%

mpn: 300-809, ean: 0844632081668,

4.2 out of 5 stars with 117 reviews
The Dayton Audio SPA1000 subwoofer amplifier provides nearly a kilowatt of clean, reliable audio power-just what you need to get big sound out of large, low-efficiency subwoofer speaker systems.High power Class-AB output stage for clean, controlled output. Patented tracking downconverter power supply for high efficiency. Toroidal power supply transformer. Low frequency parametric EQ allows you to boost or cut for custom-tailored sound. Advanced soft clip circuitry improves headroom and protects


uxcell Car 6-10 Inch Subwoofer Audio Speaker Power Amplifier Board 12V 500W
uxcell Car 6-10 Inch Subwoofer Audio Speaker Power Amplifier Board 12V 500W
By uxcell
In Stock
$28.49

mpn: a15121000ux0879, ean: 0712662934554,

4.5 out of 5 stars with 75 reviews
Universal fit for car, motorcycle, truck, home and ect.Recommended mounting speaker dimensions:6 Inch-10 Inch.Can be adjusted independently master volume, treble and bass, you can according to their own preferences for sound adjustment to meet different peoples needs;DC 12V voltage can be used, can be applied to a wide range of 12V DC cars, trucks, digging machines.With a two-way AUX input (3.5mm jack), can access computers, mobile phones, DVD or MP3 audio.Rated Power: 80W; Maximum Power: 120W;


AOSHIKE TPS5613 Digital Class D 2.1 Channels Subwoofer Amplifier Board With Bluetooth 4.0 150W+75WX2 Sub Amp Board
AOSHIKE TPS5613 Digital Class D 2.1 Channels Subwoofer Amplifier Board With Bluetooth 4.0 150W+75WX2 Sub Amp Board
By AOSHIKE
In Stock
$61.59

ean: 0732025420739,

4.0 out of 5 stars with 137 reviews
TAS5613 class D amplifier can drive a load of 4 ohms at DC35V Provide 2.1W 150W+75WX2 Output power, they use Purepath HD technology and TI high-closed loop architecture It can realize high-definition media playback and ultra-low distortion of next-generation Blu-ray home audio system, stand-alone home theater, professional audio system. It is the currently excellent digital amplifiers. Total harmonic distortion (THD+N): 100dB Input impedance: 20KOhms Output offset voltage:TAS5613 class D


Skar Audio SK-125.4D Class D 4 Channel Amplifier
Skar Audio SK-125.4D Class D 4 Channel Amplifier
By Skar Audio
In Stock
$433.25
$418.95
You Save: 3%

mpn: SK-125.4D, ean: 0852679805987,

4.5 out of 5 stars with 117 reviews
The sk-125.4D is a SK series, four channel, class d amplifier. This amplifier was designed from the ground up with several key goals in mind. At the forefront of these goals was to build the most efficient full range multichannel amplifier possible, while still being able to provide it at a reasonable price. It was also very important for us to produce an amplifier that was compact in design but able to provide a serious amount of power, you will notice the sleek compact heat sink & foot print


FidgetFidget Assembled AK4490 CSR4.0 I2S Bluetooth 4.0 DAC Decording
FidgetFidget Assembled AK4490 CSR4.0 I2S Bluetooth 4.0 DAC Decording
By FidgetFidget
In Stock
$58.56

mpn: guangpingUSW-ONAM-720-7709FD8C4F, ean: 6954231686257,

4.9 out of 5 stars with 52 reviews
Feature : All components of this product are original authentic, pure unpretentious, quality; the use of high-quality original parts, not only quality and safety are guaranteed, long service life, more importantly, that the actual performance can meet the design goal of a strong guarantee. Pursuit of the best quality is the consistent aim of our restaurant.product details:Bluetooth module using original I2S4.0 AK4490 JRC5532electrolytic capacitors imported electrolysis, ensure strong support


Dayton Audio SA100 100W Subwoofer Plate Amplifier
Dayton Audio SA100 100W Subwoofer Plate Amplifier
By Dayton Audio
In Stock
$94.80

mpn: SA100, ean: 0844632015946,

4.6 out of 5 stars with 133 reviews
This Dayton Audio SA100 100 watt subwoofer amplifier with adjustable crossover, high and low level inputs, auto on/off and phase reversal switch is perfect for building your own powered subwoofer. This plate amp offers very stable operation, with full overload protection.Low distortion audiophile sound. Adjustable low pass crossover. High and low level inputs/outputs. Auto on/off. 75 watts RMS @ 8 ohms, 100 watts RMS @ 4 ohms.


AOSHIKE NE5532 Pre-amp Preamplifier volume adjustment Board 10 times Preamp magnification board DC Single power supply 10-34V
AOSHIKE NE5532 Pre-amp Preamplifier volume adjustment Board 10 times Preamp magnification board DC Single power supply 10-34V
By AOSHIKE
In Stock
$12.95
$11.29
You Save: 13%

mpn: AOSHIKE, ean: 0796358202387,

4.1 out of 5 stars with 103 reviews
Product desciption: The preamplifier version uses NE5532 op amp as the core, with high-quality capacitor high-precision five-color ring metal film resistor production, magnification is 10 times, suitable for some low-sensitivity audio source Relative to the common preamplifier has the following characteristics: 1: DC single power supply DC power supply, wide power range 10v-34V, easy to use 2: Double panel design, the effect is better 3: The use of gold-plated carrier to facilitate the


MagiDeal 50MM Full-range Vibration Speaker Loudspeaker 4 Ohms 25 Watts Bass Horn
MagiDeal 50MM Full-range Vibration Speaker Loudspeaker 4 Ohms 25 Watts Bass Horn
By Unknown
In Stock
$33.98
$16.99
You Save: 50%

mpn: 0769006190004UKA, ean: 0706612607704,

4.5 out of 5 stars with 86 reviews
You will find what you want in Sports & Outdoors, Home & Kitchen, Beauty, Clothing, Health & Household, Tools & Improvement, Automotive Parts etc.Description: - 50MM vibration speaker - Size: Diameter x Height = 50MMx30MM - Impedance: 4 ohms - Power: 25WSpecification: - Material: Iron - Size: 50x30mmPackage Includes:1 Piece 50mm Vibration Speaker Loudspeaker50MM vibration speaker. Size: Diameter x Height = 50MMx30MM. Impedance: 4 ohms. Power: 25W.



Viewing Page 2 of 5

View more products in Speaker Parts & Components.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - aropub.org. All Rights Reserved.